Sikka Manufactures R-8 collets (M1TR Collets) for milling machines. R-8 Collet is used for clamping the cutter, drill etc. R-8 Collet is also known as M1TR collet.
The bore sizes of R8 collets are in metric sizes-2mm-25mm,
In inches sizes -1/8”,3/16”,1/4”,5/16”,3/8”,1/2”,5/8”,3/4”,7/8”,1”.All the bore sizes ready in our stock.
We can also manufacture all special milling collets according to the customer requirement.
R8 COLLETS
R8 REDUCTION SLEEVES(Taper shank)
Sikka Manufacturers R8 Reduction Sleeves(taper shank) in MT1,MT2,MT3 and Mt4 shank sizes.We have ready in our stock.The thread sizes are M12 X1.5 and ½”BSW.
R8 COLLET CHUCK
Sikka Manufacturers R8 collet chucks in ER16,ER20,ER25,ER32,ER40 Collets.The collets chucks are made in Graded steel with hardened and ground.The clamping nuts are along with R8 Collet chucks.
R8 DRILL CHUCK ARBOR
Sikka Manufacturers R8 drill chuck arbor to hold the drill chuck in milling machine.
| Code | Machine Taper | Chuck Taper | Drawbar Thread |
| 040-020-01300 | R8 | JT0 | 7/16in UNF |
| 040-020-01400 | JT1 | ||
| 040-020-01500 | JT2 | ||
| 040-020-01525 | JT33 | ||
| 040-020-01550 | JT6 | ||
| 040-020-01575 | JT3 | ||
| 040-020-01600 | B12 | ||
| 040-020-01700 | B16 |